NEW! Platform Stacker Models

Hyster® is pleased to announce the introduction of the new platform stacker models S1.2S, S1.4S, S1.6S, and S2.0S (D442).
These new models are particularly suitable for:

Stock movement and transport over short/medium distances
Internal load transfer from end of line to shelves
Line feed
Transport of pallets stacked two high in a trailer (with initial lift and double pallet configuration)
For travel over uneven floors, door sills and/or ramps (with initial lift configuration)

This new platform stacker series replaces the current S1.5S(IL) (C442 series) and features:

a wider capacity range (from 1200 kg up to 2000 kg)
a lifting height up to 6 m
1.8 kW and 2.5 kW AC traction motor
a 3 kW AC pump motor
a wide range of lead acid 24V batteries from 210 Ah to 375 Ah
Tiller arm
a maximum travel speed of 8.5 km/h with and without load

KEY SELLING POINTS

PRODUCTIVITY

Competitive lifting and lowering speeds
Maximum speed up to 8.5 km/h with 2.5 kW traction motor

DEPENDABILITY

Robust base frame and battery cover
Sealed connectors
Single CAN bus with two redundant microcontrollers to increase reliability

ERGONOMICS

Large foldable platform, with rubber floormat to provide excellent grip
Easy to read and reach dashboard in front of the operator
Good visibility through mast
Side arms designed for operator protection and comfort, easy and quick to open/close

SERVICEABILITY

Greased for life load rollers in mast design
Display provide error codes, battery status and hour meter
Plug-in service access
Bolt-on side arms cushion and bolt-on platform (easy to install/replace)

COST OF OWNERSHIP

Electric system reliability

AVAILABLE OPTIONS

Two stage NFL/FFL and three stage FFL mast type
Key and keypad start system
Cold store application
Wire mesh grid and lexan mast guard
Load backrest
Double pallet (with initial lift configuration)
Several forks length
Single and tandem load wheels
Wide range of drive wheels
Pedestrian Awareness Light
Additional options like support bars, bottle holder, roll holder, A4 clipboard
On board and external chargers
Hyster Tracker

For further details on available options please refer to NOVO.

ORDERING PROCEDURE, AVAILABILITY AND PRICING

The new S1.2S, S1.4S, S1.6S and S2.0S platform stacker models are available to order through NOVO, using series code D442, from 1 August 2019. First production of this new series is planned for October 2019.

For prices of the D442 platform stacker series, please check NOVO.

SALES LITERATURE

The S1.2S, S1.4S, S1.6S and S2.0S (D442) specification sheet is in process and will become available in digital format via the Hyster Marketing Toolkit on hysterdealer.eu or via the Hyster website product pages at hyster.com as soon as they are ready.

BATTERIES

For details on the available batteries and chargers for the S1.2S, S1.4S, S1.6S and S2.0S (D442) see NOVO. For battery drawings for this new truck series see the Hyster Battery Drawing site, which has been updated.

RECOMMENDED DEALER STOCKING LISTS (RDSL)

The RDSL for the S1.2S, S1.4S, S1.6S and S2.0S (D442) will become available under the Parts Operations site on Hyster Dealer website, when the first trucks are ready for shipment.

RDSLs indicate periodic maintenance parts and essential maintenance parts. Periodic maintenance parts are service parts requirements for periodic maintenance based on the Service Reference Manual for this specific truck series. Essential maintenance parts are parts we recommend you to keep in stock from day one.